DEMULSIFICATION OF CUTTING FLUID BEFORE DISPOSAL TO THE ENVIRONMENT

محتوى المقالة الرئيسي

Abbas Hamid Sulaymon
Laith Hamzah Thuaban

الملخص

In this research the treatment of 7201 cutting fluid was carried out to decrease its environmental impact on water resources after being used and being less effective due to the action of contaminants.
The breaking of emulsion was carried out using two methods: The first method was by using acid and/or heat. 1 molar sulfuric acid was used to decrease pH to 1.5 whth heating the emulsion to 90 ºC. It was found that the acid is the dominating factor in emulsion breaking and the maximum efficiency achieved was 85% after one day using (10335 ppm) sulfuric acid. The second method was by using two different types of coagulants calcium chloride (CaCl2) and ferric chloride (FeCl3) at different emulsified oil concentrations (2, 4, 6, 8, 10% by volume.), and the residual oil concentration in water layer was measured for each experiment.
It was found that using ferric chloride (FeCl3) gave the best emulsion breaking and least residual oil concentration in water layer for all emulsified oil concentrations.

تفاصيل المقالة

القسم

Articles

كيفية الاقتباس

"DEMULSIFICATION OF CUTTING FLUID BEFORE DISPOSAL TO THE ENVIRONMENT" (2010) مجلة الهندسة, 16(01), ص 4580–4592. doi:10.31026/j.eng.2010.01.15.

المراجع

Champion technologies, "Emulsion breakers", www.champ-tech.com. 2008

 Christine Dalmazzone, Christine Noïk, "Development of new green demulsifiers for oil production", Society of Petroleum Engineers Inc. 2001 www. www.sci-tec-inc.com.

 Dennis TV. Brinkman "emulsified industrial oils recycling" U. S Department of Energy Division of Industrial Energy Conservation. April 1982.

 FUCHS lubricants (Australasia),"newly developed slideway oils for machines". 2005 www. thode.co.nz.

Ian MacPherson, Richard Edward Kuhlman, Michael J. Milo," Emulsifier/demulsifier system", 2005.

 José Manuel Benito*, Guillermo Ríos, Enrique Ortea, Eva Fernández, Angel Cambiella, Carmen Pazos, José Coca, " Design and construction of a modular pilot plant for the treatment of oil-containing wastewaters", Elsevier Science B.V. Desalination, 2002.

 Joseph Cruz," cutting fluid recycler" Naval Air Warfare Center, Aircraft Division, March 1999.

 Kemmer, F.N, "NALCO Water Handbook", (2nd Edition) McGraw-Hill, 1988.

 M. Abid Baig, Mohsin Mir, Zafar I. Bhatti and M A. Baig, " removal of oil and grease from industrial effluents ", Electronic Journal of Environmental, Agricultural and Food Chemistry.2004.

 R. L. Gealer A. Golovoy M. Weintraub," Electrolytic Treatment of Oily Wastewater from Manufacturing and Machining Plants" United States Environmental Protection Agency. 1980.

 Shweta D.Mehta," making and breaking of water in oil emulsion" Thesis 2005. www. txspace.tamu.edu.

 Taylor, Grahame N," Demulsification of water-in-oil emulsions", United States Patent 6638983, 1994.

المؤلفات المشابهة

يمكنك أيضاً إبدأ بحثاً متقدماً عن المشابهات لهذا المؤلَّف.