INVESTIGATION ON THE USE OF MICROPILES FOR SUBSTITUTION OF DEFECTED PILES BY THE FINITE ELEMENT METHOD
محتوى المقالة الرئيسي
الملخص
Micropiles are small diameter, cast in – place or grouted piles with steel pipes of (50 to 300 mm) diameters and driven by boring machine. Despite their small wall thickness, high bearing capacity of micropiles provides both axial and pullout resistance.nThis paper is directed to study the behavior of micropiles under static and dynamic loading conditions using the finite element method. The program OpenSees is used in the analysis, it is open – source program, provides information about the software architecture, access to the source code, and the development process. The program is based on the basic commands, which are written in Tcl (pronounced, "tickle"; tool command language). A model for groups of laterally loaded pipe piles in sand was adopted to study the effect of defects on their lateral performance. The geometric arrangement consisted of group series of 2, 4 and 6 equally spaced piles. Eight node brick elements are used to model the pile and the surrounding soil. It was concluded that the deflection of laterally loaded piles decreases when inserting steel micropiles beside the defect pile at two opposite directions. The increase in the group deflection is greater when the defected pile is modeled in the front row.
تفاصيل المقالة
كيفية الاقتباس
تواريخ المنشور
المراجع
Armour, T.P.E., Paul, G. P.E., James, K. P.E. and Sunil S. P.E., (2000), ” Micropile Design and Construction Guidelines “, U.S. Department of Transportation, Federal Highway Administration, Priority Technologies Program.
Ata, A. and El-Kilany, M. (2006), “Effect of Anomalies on the Behavior of Laterally Loaded Pile Groups”, Proceedings of the 4th Jordanian Civil Engineering Conference, 10-13April 2006, Amman – Jordan.
Hronek, J.W. Madlyn, P.E., and Guarino, G., (2007), “Developing Foundation Support for the Reconstruction of Bridge Over Como Avenue, Minneapolis, MN”, Report from Internet.
Juran, I., Bruce, D.A., Dimillio, A., and Benslimane, A., (1999), “Micropiles: The State of Practice. Part II: Design of Single Micropiles and Groups and Networks of Micropiles”. Ground Improvement, Vol. 3, pp. 89-110.
Kadhim Y.M., (2008), “Investigation on the Use of Micropiles as Foundation Support Elements”, Ph.D. Thesis, College of Engineering, University of Baghdad, Iraq.
Kalkan E., (2003), “Nonlinear Modeling of Micropile Foundation Systems “, University of California, Davis, U.S.A., Report from Internet.
Lizzi, F., (1982), “The Pali Radice (Root Piles),” Symposium on Soil and Rock Improvement Techniques including Geotextiles, Reinforced Earth and Modern Piling Methods, Bangkok, December, Paper Dl , ( as Cited by Armour, et al., 2000).
Plumelle, C., (1984), “Improvement of the Bearing Capacity of Soil by Inserts of Group and Reticulated Micropiles”, International Symposium on In-situ Reinforcement of Soils and Rocks, Paris, ENPC Press, pp. 83-89.
Silvia M., Frank M., and Gregory L. F., (2005), “OpenSees Command Language Manual”, OpenSees v. 1.6, Printed on 31 January.