THEORETICAL AND EXPERIMENTAL STUDY ON THERMAL PERFORMANCE OF CLOSED WET COOLING TOWER
محتوى المقالة الرئيسي
الملخص
Thermal performance of closed wet cooling tower has been investigated experimentally and theoretically
in this work. The theoretical model based on heat and mass transfer equations and heat and mass transfer balance equations which are established for steady state case. A new small indirect cooling tower was used for conducting experiments. The cooling capacity of cooling tower is 1 kW for an inlet water temperature of 38oC, a water mass velocity 2.3 kg/m2.s and an air wet bulb temperature of 26oC. This study investigates the relationship between saturation efficiency, cooling capacity and coefficient of performance of closed wet cooling tower versus different operating parameters such wet-bulb temperature, variable air-spray water flow ratio and cooling water inlet temperature. Results indicate that the capacity and saturation efficiency was found close to the related experimental results. Good agreement was obtained between the theoretical results and experimental measurements for the performance of small cooling tower.
تفاصيل المقالة
كيفية الاقتباس
تواريخ المنشور
المراجع
- ASHRAE, 1998, Hand-book of fundamentals, American Society Heating Refrigeration and Air Conditioning Engineering, USA.
- R.T.I. Mizushina, H. Miyashita, 1968, Characteristics and methods of thermal design of evaporative cooler, International Chemical Engineering, Vol.8, No.3, 532-538.
- Cooling tower, 2000, ASHRAE HVAC systems and Equipment, American society of heating, Refrigeration and Air conditioning, USA.
- P. Stabat and D. Marchio, 2004, Simplified model for indirect-contact evaporation cooling tower behavior, Applied, Energy No.78, 433-451.
- Ala Hasan and kairen , 2002, Theoretical and computational analysis of closed wet cooling towers and its applications in cooling of buildings, Energy and Buildings, Vol. 34, No.5, 477-486.
- Merkel, 1925, Verdunstungskuehlung, VDI Forrschungs Sarbiten, No.275, Berlin.
- S.Y. Yoo, J. H. Kim and K.H. Han, 2010, Thermal performance analysis of heat exchange for closed wet cooling tower using heat and mass transfer analogy, Journal of Mechanical Science and Technology, Vol.24, No.4, 893-898.
- A. Oliveira and J. Facao, 2002, Heat and mass transfer correlations the design of small indirect contact cooling tower, 1st International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Kruger Park, South Africa.
- J. Facao and C. Oliveira, 2000, Thermal behavior of closed met cooling towers for use with chilled ceilings, applied thermal Engineering, No.20, 1225-1236.
- M.M.A. Sarker, C.G. Moon and J.I. Yoon, 2005, The cooling capacity and pressure drop in a hybrid closed circuit cooling tower, Proceeding of the International Conference of Mechanical Engineering, Dhaka, Bangladesh.
- S. Riffat, A. Oliveira, J. Facao, G. Gan and P. Doherty, 2000, Thermal performance of closed wet cooling tower for chilled ceiling: Measurement and CFD simulation, International Journal of Energy Research, No.24, 1171-1179.
- Yeon Yoo, S., Kim, J.H, and H, k.h., 2010, " Thermal performance analysis of heat exchanger for closed wet cooling tower", Journal of mechanical science and technology, Vol.24, No.4,. 29-34.