Plasmon-like Optical–Thermal Coupling in Nano-Engineered Solar Absorber Coatings Integrated Structural, Spectral, and Photothermal Analysis
Main Article Content
Abstract
This work involves preparing photothermal absorber coatings with nanoparticle additives and their characterization for photo-thermal conversion applications. It includes the correlation between additions of metallic and metal oxide particles, the optical properties of the composite coatings and their photo-thermal conversion characteristics. Coatings incorporating Ni, Fe3O4, CuO, NiO, and MnO₂ are characterized using SEM–EDS, UV–Vis spectroscopy (200–1000 nm), specular reflection measurements. The coatings are also subjected to time-resolved photothermal analysis. Ni-incorporated coatings exhibited the highest measured thermal performance among the investigated coatings. A maximum surface temperature of 93.93 °C and stored thermal energy of 213.10 J with a peak heating rate indicator of 0.360 are obtained corresponding to a visible absorption peak at approximately 540 nm. A high spectral absorptance (AUCα) of about 1.717 and a low reflectivity of 4.6% are also obtained. The results are in agreement with the proposed plasmon-like absorption behavior in metallic Ni nanoparticles that can lead to the transformation of photons into heat. The Fe3O4- and CuO-incorporated coatings show competitive performance due to broadband absorption mechanisms. The NiO- and MnO2-incorporated coatings are found to exhibit lower efficiency due to UV-dominated absorption. Despite its high absorptance, the primary coating thermal response remains limited due to the absence of conductive pathways. Correlation analysis indicates that no individual spectral parameter alone governs photothermal performance. The results demonstrate that effective photo–thermal conversion requires the combined effect of broadband absorption, plasmon-assisted or defect-mediated mechanisms in addition to suitable microstructural characteristics.
Downloads
Article Details
Section
How to Cite
References
Al-Obaidy, A.M.H., Fayyadh, E.M. and Al-Dabagh, A.M., 2024. Effect of nano and nanocomposite coating on pool boiling heat transfer. Engineering and Technology Journal, 42(7), pp. 1048–1060. https://doi.org/10.30684/etj.2024.149236.1742.
Biesinger, M.C., 2017. Advanced analysis of copper X-ray photoelectron spectra. Surface and Interface Analysis, 49(13), pp. 1325–1334. https://doi.org/10.1002/sia.6239.
Cao, G., 2004. Nanostructures and Nanomaterials: Synthesis, Properties and Applications. Imperial College Press, London. http://dx.doi.org/10.1142/9781860945960.
Chen, H., Shao, L., Ming, T., Sun, Z., Zhao, C., Yang, B. and Wang, J., 2010. Understanding the photothermal conversion efficiency of gold nanocrystals. Small, 6(20), pp. 2272–2280. https://doi.org/10.1002/smll.201001109.
Cockayne, E. and Li, L., 2012. First-principles DFT + U studies of the atomic, electronic, and magnetic structure of α-MnO₂ (cryptomelane). Chemical Physics Letters, 544, pp. 53–58. https://doi.org/10.1016/j.cplett.2012.06.061.
Cornell, R.M. and Schwertmann, U., 2003. The Iron Oxides: Structure, Properties, Reactions, Occurrences and Uses. 2nd ed. Wiley-VCH. https://doi.org/10.1002/3527602097.
Cullity, B.D. and Stock, S.R., 2001. Elements of X-ray Diffraction. 3rd ed. Prentice Hall, Upper Saddle River, NJ.
Dawood, N.I., Jalil, J.M. and Faraj, S.R., 2025. Thermal performance enhancement of solar collectors by nanoparticles and magnetic field: a review. Engineering and Technology Journal, 43(1), pp. 75–93. https://doi.org/10.30684/etj.2024.152986.1809.
Devaraj, S. and Munichandraiah, N., 2008. Effect of crystallographic structure of MnO₂ on its electrochemical capacitance properties. Journal of Physical Chemistry C, 112(11), pp. 4406–4417. https://doi.org/10.1021/jp7108785.
Duffie, J.A. and Beckman, W.A., 2013. Solar Engineering of Thermal Processes. 4th ed. Wiley, Hoboken, NJ. https://doi.org/10.1002/9781118671603.
E Silva, F.A., Salim, V.M.M. and Rodrigues, T.S., 2024. Controlled Nickel nanoparticles: A review on how parameters of synthesis can modulate their features and properties. AppliedChem, 4(1), pp. 86–106. https://doi.org/10.3390/appliedchem4010007.
Farchado, M., San Vicente, G., Barandica, N., Sánchez-Señorán, D. and Morales, Á., 2024. High performance selective solar absorber stable in air for high temperature applications. Solar Energy Materials and Solar Cells, 271, P. 112849. https://doi.org/10.1016/j.solmat.2024.112849.
Farooq, S.A., Raina, A., Mohan, S., Singh, R.A., Jayalakshmi, S. and Ul Haq, M.I., 2022. Nanostructured coatings: Review on processing techniques, corrosion behaviour and tribological performance. Nanomaterials, 12(8), P. 1323. https://doi.org/10.3390/nano12081323.
Fontijn, W.F.J., van der Zaag, P.J., Devillers, M.A.C., Brabers, V.A.M. and Metselaar, R., 1997. Optical and magneto-optical polar Kerr spectra of Fe₃O₄ and Mg²⁺- or Al³⁺-substituted Fe₃O₄. Physical Review B, 56, pp. 5432–5442. https://doi.org/10.1103/PhysRevB.56.5432.
Goldstein, J.I., Newbury, D.E., Michael, J.R., Ritchie, N.W.M., Scott, J.H.J. and Joy, D.C., 2018. Scanning Electron Microscopy and X-Ray Microanalysis. 4th ed. Springer. https://doi.org/10.1007/978-1-4939-6676-9.
Granqvist, C.G., 2007. Transparent conductors as solar energy materials: A panoramic review. Solar Energy Materials and Solar Cells, 91(17), pp. 1529–1598. https://doi.org/10.1016/j.solmat.2007.04.031.
Kalogirou, S.A., 2014. Solar Energy Engineering: Processes and Systems. 2nd ed. Academic Press, London. https://doi.org/10.1016/C2011-0-07038-2.
Kennedy, C.E., 2002. Review of Mid- to High-Temperature Solar Selective Absorber Materials. National Renewable Energy Laboratory (NREL), Report No. NREL/TP-520-31267, Golden, CO, USA. https://doi.org/10.2172/15000706.
Kumar, K.K.P., Atchuta, S.R., Prasad, M.S., Barshilia, H.C. and Sakthivel, S., 2024. Review on selective absorber coatings: A catalyst for enhanced solar energy conversion efficiency. Solar Energy Materials and Solar Cells, 277, 113080. https://doi.org/10.1016/j.solmat.2024.113080.
Lakowicz, J.R., 2006. Principles of Fluorescence Spectroscopy. 3rd ed. Springer. https://doi.org/10.1007/978-0-387-46312-4.
Laurent, S., Forge, D., Port, M., Roch, A., Robic, C., Vander Elst, L. and Muller, R.N., 2008. Magnetic iron oxide nanoparticles: Synthesis, stabilization, vectorization, physicochemical characterizations, and biological applications. Chemical Reviews, 108(6), pp. 2064–2110. https://doi.org/10.1021/cr068445e.
Link, S. and El-Sayed, M.A., 2000. Shape and size dependence of radiative, non-radiative and photothermal properties of gold nanocrystals. International Reviews in Physical Chemistry, 19(3), pp. 409–453. https://doi.org/10.1080/01442350050034180
Liu, B., Wang, C., Bazri, S., Badruddin, I.A., Orooji, Y., Saeidi, S., Wongwises, S. and Mahian, O., 2021. Optical properties and thermal stability evaluation of solar absorbers enhanced by nanostructured selective coating films. Powder Technology, 377, pp. 939–957. https://doi.org/10.1016/j.powtec.2020.09.040.
Naik, G.V., Shalaev, V.M. and Boltasseva, A., 2013. Alternative plasmonic materials: beyond gold and silver. Advanced Materials, 25(24), pp. 3264–3294. https://doi.org/10.1002/adma.201205076.
Paredes, J.I. and Burghard, M., 2004. Dispersions of individual single-walled carbon nanotubes of high length. Langmuir, 20(12), pp. 5149–5152. https://doi.org/10.1021/la049831z.
Post, J.E., 1999. Manganese oxide minerals: Crystal structures and economic and environmental significance. Proceedings of the National Academy of Sciences, 96(7), pp. 3447–3454. https://doi.org/10.1073/pnas.96.7.3447.
Powell, C.J. and Jablonski, A., 2011. NIST Electron Effective-Attenuation-Length Database. National Institute of Standards and Technology (NIST).
Rao, C.N.R. and Raveau, B., 1998. Transition Metal Oxides. Wiley-VCH.
Rashid, H.J., Sultan, K.F. and Anead, H.S., 2022. Thermal performance of an evacuated-tube solar collector using nanofluids and an electrical curtain controlled by an artificial intelligence technique. Engineering and Technology Journal, 40(1), pp. 8–19. https://doi.org/10.30684/etj.v40i1.2021.
Reimer, L. and Kohl, H., 2008. Transmission Electron Microscopy: Physics of Image Formation. 5th ed. Springer. https://doi.org/10.1007/978-0-387-40093-8.
Rocha, R.C. and Toma, H.E., 2002. Electron transfer in inorganic mixed-valence systems. Química Nova, 25(4), pp. 624–638. https://doi.org/10.1590/S0100-40422002000400018.
Sawatzky, G.A. and Allen, J.W., 1984. Magnitude and origin of the band gap in NiO. Physical Review Letters, 53(24), pp. 2339–2342. https://doi.org/10.1103/PhysRevLett.53.2339.
Selvakumar, N. and Barshilia, H.C., 2012. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications. Solar Energy Materials and Solar Cells, 98, pp. 1–23. https://doi.org/10.1016/j.solmat.2011.10.028.
Shaw, M., Samanta, D., Bera, S., Mahto, M.K., Shaik, M.A.S., Konar, S., Mondal, I., Dhara, D. and Pathak, A., 2022. Role of surface oxygen vacancies and oxygen species on CuO nanostructured surfaces in model catalytic oxidation and reductions: Insight into the structure–activity relationship toward the performance. Inorganic Chemistry, 61(37), pp. 14568–14581. https://doi.org/10.1021/acs.inorgchem.2c01467.
Somlyai-Sipos, L., Czagány, M., Janovszky, D. and Baumli, P., 2019. Synthesis and investigation of nickel nanoparticles. Proceedings of the 5th World Congress on New Technologies (NewTech’19), Lisbon, Portugal, 2019. https://doi.org/10.11159/icnfa19.118.
Tripathi, A., Dixit, T., Agrawal, J. and Singh, V., 2020. Bandgap engineering in CuO nanostructures: Dual-band, broadband, and UV-C photodetectors. Applied Physics Letters, 116(11), P. 111102. https://doi.org/10.1063/1.5128494.
Valeur, B. and Berberan-Santos, M.N., 2012. Molecular Fluorescence: Principles and Applications. 2nd ed. Wiley-VCH. https://doi.org/10.1002/9783527650002.
Wang, H., 2021. Structure, optical properties and thermal stability of all-ceramic solar selective absorbing coatings: A mini review. Frontiers in Energy Research, 9, 789917. https://doi.org/10.3389/fenrg.2021.789917.
West, P.R., Ishii, S., Naik, G.V., Emani, N.K., Shalaev, V.M. and Boltasseva, A., 2010. Searching for better plasmonic materials. Laser & Photonics Reviews, 4(6), pp. 795–808. https://doi.org/10.1002/lpor.200900055.
Williams, D.B. and Carter, C.B., 2009. Transmission Electron Microscopy: A Textbook for Materials Science. 2nd ed. Springer. https://doi.org/10.1007/978-0-387-76501-3.
Xu, K., Du, M., Hao, L., Mi, J., Yu, Q. and Li, S., 2020. A review of high-temperature selective absorbing coatings for solar thermal applications. Journal of Materiomics, 6(1), pp. 167–182. https://doi.org/10.1016/j.jmat.2019.12.012.
Zayed, M.E., 2024. Recent advances in solar thermal selective coatings for solar power applications: technology categorization, preparation methods, and induced aging mechanisms. Applied Sciences, 14(18), 8438. https://doi.org/10.3390/app14188438.