Modeling of Comparative Performance of Asphalt Concrete under Hammer, Gyratory, and Roller Compaction

Main Article Content

Saad I. Sarsam, Prof.
Mahmood Khalid Jumaah, MSc student

Abstract

The main objective of this study is to develop predictive models using SPSS software (version 18) for Marshall Test results of asphalt mixtures compacted by Hammer, Gyratory, and Roller compaction. Bulk density of (2.351) gm/cc, at OAC of (4.7) % was obtained as a benchmark after using Marshall Compactor as laboratory compactive effort with 75-blows. Same density was achieved by Roller and Gyratory Compactors using its mix designed methods.


A total of (75) specimens, for Marshall, Gyratory, and Roller Compactors have been prepared, based on OAC of (4.7) % with an additional asphalt contents of more and less than (0.5) % from the optimum value. All specimens have been subjected to Marshall Test. Mathematical models obtained indicated that variation of Marshall Stiffness is based on the variation of air voids. All of these models depend on asphalt cement content too.


 


 

Article Details

How to Cite
“Modeling of Comparative Performance of Asphalt Concrete under Hammer, Gyratory, and Roller Compaction” (2016) Journal of Engineering, 22(11), pp. 1–15. doi:10.31026/j.eng.2016.11.01.
Section
Articles

How to Cite

“Modeling of Comparative Performance of Asphalt Concrete under Hammer, Gyratory, and Roller Compaction” (2016) Journal of Engineering, 22(11), pp. 1–15. doi:10.31026/j.eng.2016.11.01.

Publication Dates

Similar Articles

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)