BEARING CAPACITY OF SHALLOW FOOTINGS RESTING ON DUNE SAND

محتوى المقالة الرئيسي

Bushra S. Albusoda
Lubna A. Kh. Salem

الملخص

As a result of the growth of economic, demographic and building activities in Iraq, that necessitates carrying out geotechnical investigations for the dune sand to study behavior of footings resting on these soils. To determine these properties and to assess the suitability of these materials for resting shallow foundation on it, an extensive laboratory testing program was carried out. Chemical tests were carried out to evaluate any possible effects of the mineralogical composition of the soil on behavior of foundation rested on dune sands.
Collapse tests were also conducted to trace any collapse potential. Loading tests were carried out for optimum water content and different shapes of footing. Loading test recommends manufacturing of steel box and footing models with different shapes and dimensions. The results indicated that, Affek dune sand is predominantly fine sand with non-plastic fines.
Because the content of sulphate (as SO3) is only 0.05%, and the alkalinity of dune sand, which reduces the corrosion potential, ordinary Portland cement can be used in concrete foundation construction in/on dune sands. The results of collapsing tests showed that Affek dune sand exhibit a slight to moderate potential depending on stress level. Due to Soaking by water, the reduction in bearing capacity of optimum state was about 45%. The bearing capacity of square footing was greater than those of the circular and rectangular footings.

تفاصيل المقالة

كيفية الاقتباس
"BEARING CAPACITY OF SHALLOW FOOTINGS RESTING ON DUNE SAND " (2012) مجلة الهندسة, 18(03), ص 298–308. doi:10.31026/j.eng.2012.03.02.
القسم
Articles

كيفية الاقتباس

"BEARING CAPACITY OF SHALLOW FOOTINGS RESTING ON DUNE SAND " (2012) مجلة الهندسة, 18(03), ص 298–308. doi:10.31026/j.eng.2012.03.02.

تواريخ المنشور

المراجع

Aiban, S. A. (1995):"Centrifugal Verification of Bearing Capacity and Shape Factors of Shallow Foundations on Sands", The fourth Saudi Engineering Conference, November, Volume 2, pp 361-367.

Al-Taie, A. J. (2002):"Properties and Behavior of Dune Sands as a Construction Material", M.Sc. thesis, Civil Engineering Department,University of Baghdad, Iraq.

ASTM D1194-94: "Standard Test Method for Bearing Capacity of Soil for Static Load and Spread Footings", (Withdrawn 2003).

ASTM D2049-69: "Test Method for Relative Density of Cohesionless Soils". (Withdrawn 1993).

ASTM D2434-64T: "Standard Test Method for Permeability of Granular Soils, (Variable Head). 6. ASTM D3080-64T: "Standard Test Method for Direct Shear Test of Soils Unconsolidated Undrained Conditions".

ASTM D4253-00: "Standard Test Method for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table

ASTM D4254-00: "Standard Test Method for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density".

ASTM D5333-00: "Standard Test Method for Measurement of Collapse Potential of Soils".

ASTM D698-00a: "Standard Test Methods for Laboratory Compaction Characteristics of Using Standard Effort (600 kNm/m3 )".

ASTM D854-00: "Standard Test Method for Specific Gravity of Soil Solids by Pycnometer".

Das, B. M. (2007): "Principle of Foundation Engineering", Sixth Edition, Adapted International Student Edition, Nelson a Division of Thomson Canada Limited.

Jannings, J. E. and Knight, K. (1975) : "A Guide to Construction on or with Materials Exhibiting Additional Settlement Due to 'Collapse' of Grain

Structure", Proceedings,Sixth Regional Conference for Africa on Soil Mechanics and foundation Engineering Johannesburg, South Affrica,pp 99-105.

Ismael, N. F. (1994):"Properties and Behavior of Arid Climate Soil Deposits in Kuwait", Civil Engineering Department,University of Kuwait.

Terzaghi, K. (1943):"Theoretical Soil Mechanic ", John Wiley and Sons, New York.

Terzaghi, K. and Peck, R. (1967):"Soil Mechanics in Engineering Practice". Second Edition, John Wiley and Son, NY.

White, D. J. (2008): "Contributions to G'eotechnique 1948-2008: Physical Modeling",G'eotechnique 58, No. 5, pp. 413-421.

المؤلفات المشابهة

يمكنك أيضاً إبدأ بحثاً متقدماً عن المشابهات لهذا المؤلَّف.