Vibration Control Analysis of a Smart Flexible Cantilever Beam Using Smart Material
محتوى المقالة الرئيسي
الملخص
This paper features the modeling and design of a pole placement and output Feedback control technique for the Active Vibration Control (AVC) of a smart flexible cantilever beam for a Single Input Single Output (SISO) case. Measurements and actuation actions done by using patches of piezoelectric layer, it is bonded to the master structure as sensor/actuator at a certain position of the cantilever beam.
The smart structure is modeled based on the concept of piezoelectric theory, Bernoulli -Euler beam theory, using Finite Element Method (FEM) and the state space techniques. The number of modes is reduced using the controllability and observability grammians retaining the first three
dominant vibratory modes, and for the reduced system, a control law is designed using pole placement and output feedback techniques. The analyzed case studies concern the vibration reduction of a cantilever beam with a collocated symmetric piezoelectric sensor/actuator pair bonded on the surface. The transverse displacement time history, for an initial displacement field at the free end, is evaluated. Results are compared with other works, and the control design shows that Pole Placement method is an effective method for vibration suppression of the beam and settling time reduction.
تفاصيل المقالة
كيفية الاقتباس
تواريخ المنشور
المراجع
Anna-Maria R. McGowan, et. al., NASA Langley Sesearch Center, Aeroelasticity and Structural Dynamics branches, “Aeroservoelatic and structural dynamics research on smart structruras conducted at NASA Langley Research Center”, Hampton, Virginia, May, 1998.
B. Bandyopadhyay, T.C. Manjunath, M. Umapathy “Modeling, Control and Implementation of Smart Structures, AFBerlin Heidelberg, New York, USA, 2007.
Daniel J. Inman, “Vibration with Control”, John Wiley & Sons Ltd, England, 2006.
Deepak Chhabra, Pankaj Chandna and Gian Bhushan,” Design and Analysis of Smart Structures for Active Vibration Control using Piezo-Crystals”, International Journal of Engineering and Technology Volume-1 No.3, December,
Gergely Takács, ”Experimental Verification Of The Closed-Loop Response Of An Active VibrationControl System Modeled In ANSYS”, The 4th International conference -Modeling Of Mechanical And Mechatronic Systems, Faculty of Mechanical engineering, Technical university of Košice, Slovak, 2011.
Meysam Chegini, Milad Chegini and Hadi Mohammadi,” Vibration Suppression of a Beam of Structures”, IACSIT International Journal of Engineering and Technology, Vol.3, No.2, 2011.
Michael R. Hatch, “Vibration simulation using MATLAB and ANSYS”, Chapman & Hall/CRC, 2001.
Nader Jalili, “Piezoelectric-Based Vibration Control, From Macro to Micro/Nano Scale Systems”, Springer Berlin Heidelberg, New York, USA, 2010.
R.G. Ballas, “Piezoelectric Multilayer Beam Bending Actuators: Static and Dynamic Behavior and Aspects of Sensor Integration”, Springer-Verlag Berlin Heidelberg, 2007.
Ranjan Vepa, “Dynamics of Smart Structures”, John Wiley and Sons Ltd. Publication, UK, 2010.
Scott M. Newman, Thesis Titled “Active Damping Control of a Flexible Space Structure Using Piezoelectric Sensors and Actuators”, NAVAL Postgraduate School, Monterey, California, 1992.
T.C. Manjunath and B. Bandyopadhyay, “Control of Vibrations in Flexible Smart Structures using Fast Output Sampling Feedback Technique”, International Journal of Information and Mathematical Sciences 3:2, 2007.
Tamara Nestorović, Miroslav Trajkov, “Active Control of Smart Structures an Overall Approach”, FACTA Universitatis, Architecture and Civil Engineering, Vol. 8, No 1, pp. 35 – 44, 2010.EM - State Space Approach”, Springer