Potential Use of Recycled Asphalt Pavement (RAP) in Hot MixAsphalt

Main Article Content

Namir Ghani Ahmed
Abbaas Inaayah Kareem
Alaa Saadi Abbas

Abstract

The objective of the present paper is to examine the effect of Recycled Asphalt Pavement (RAP) on marshall properties and indirect tensile strength of HMA through experimental investigation. A mixture with 0% RAP was used as a control mix to evaluate the properties of mixes with 5%, 10%, and 15% RAP. One type of RAP was brought from Bab Al-moadam’s road in Baghdad for this purpose. The experimental testing program included Marshall and Indirect Tensile Strength tests. The results indicated that the bulk density, flow and VFA increase with the increasing of the percentage of RAP, while increasing in RAP results decreases in VTM and VMA values. Furthermore, the stability is changed from 10.1 kN for the control mix to12, 13.6 and 11.7 kN for mixes with 5%, 10% and 15% RAP respectively. The results reveal that the inclusion of RAP into HMA mixtures increases the indirect tensile strength and decreases the values of ITS with the increasing of the test temperature. The results also indicated that increasing the percentage of RAP
produces an increasing in temperature susceptibility value. The results of marshall properties and IDT test indicate that the amount of new binder that needs to be added to the RAP mixture can be reduced without significant effects on the quality of the produced mix

Article Details

Section

Articles

How to Cite

“Potential Use of Recycled Asphalt Pavement (RAP) in Hot MixAsphalt” (2013) Journal of Engineering, 19(10), pp. 1243–1255. doi:10.31026/j.eng.2013.10.04.

References

• “ASTM”, (1988), Annual Book of ASTM Standers, Section 4, Volume 04.03, American Society for Testing and Materials, Philadelphia, USA.

• Apeagyei A, Diefenderfer B, and Diefenderfer K., (2011). ”Rutting Resistance of Asphalt Concrete Mixtures That Contain Recycled Asphalt Pavement.” Journal of the Transportation Research Board, No. 2208, pp. 9–16.

• ASTM, (2000), "Road and Paving Materials", Annual Book of ASTM Standards, Volume 04.03, American Society for Testing and Materials, Philadelphia, USA.

• Behnia B., Dave E., Ahmed S., Buttlar W. and Reis H., (2011). ). ”Effects of Recycled Asphalt Pavement Amounts on Low-Temperature Cracking Performance of Asphalt Mixtures Using Acoustic Emissions.” Journal of the Transportation Research Board, No. 2208, pp. 64–71.

• Daniel J. and Lachance A., (2005).”Mechanistic and Volumetric Propertiesof Asphalt Mixtures with Recycled Asphalt Pavement.” Journal of the Transportation Research Board, No. 1929, pp. 28–36

• Intisar M. J. Al-Aakaily,(2011),"Design and Management of Recycled Flexible Pavement in Iraq.",M.Sc.Thesis, Al-Mustansiriya University

• .SCRB/R9, (2003), "General Specification for Roads and Bridges", Section R/9, HotMix Asphalt Concrete Pavement, Revised Edition. State Corporation of Roads and Bridges, Ministry of Housing and Construction, Republic of Iraq.

• Shu X., Huang B and Vukosavljevic D., (2008). ”Laboratory evaluation of fatigue characteristics of recycled asphalt mixture.” Journal of Construction and Building Materials, Vol. 22, pp. 1323-1330.

• Tran B. and Hassan R., (2011). ”Performance of Hot-Mix Asphal Containing Recycled Asphalt Pavement.”Journal of the Transportation Research Board, No. 2205, pp. 121–129.

• Valdés G., Pérez-Jiménez F, Mir◌َ R, Martnez A .and, Botella R., (2011).”Experimental study of recycled asphalt mixtures with high percentages of reclaimed asphalt pavement (RAP).”Journal of Construction and Building Materials,Vol.25,pp.1289–1297

Similar Articles

You may also start an advanced similarity search for this article.